SHARKAN FISHING DRONE
012-6534499 / 0825697780(Morne) / 0824487226 (Craig) sales@sharkan.co.za

5000mAh 22.2V 4S1P 50C Lipo Battery Pack with XT90 Plug 

R1800

Spec.Capacity: 5000mAh

Voltage: 6 Cell / 22.2V

Discharge: 50C Constant / 100C Burst

Weight: 800g (including wire, plug & case)

Dimensions: 157x45x60mm

Balance Plug: JST-XH

Charge Rate: 2-5A Recommended.5A

Discharge Plug: XT90

6000mAh 22.2V 6S1P 50C Lipo Battery Pack with XT90 Plug 

R2150

Spec.Capacity: 6000mAh

Voltage: 6S1P / 6 Cell / 22.2V

Discharge: 50C Constant / 100C Burst

Weight: 860g (including wire, plug & case)

Dimensions: 157x45x60mm

Balance Plug: JST-XH

Charge Rate: 1-5A Recommended. 5A

Discharge Plug: XT90


GRAPHENE 6000mAh 22.2V 6S1P 100C Lipo Battery Pack with XT90 Plug 

R2750

About Graphene battery advantage: 
Graphene packs utilize carbon in the battery structure to form a single layer of graphene just 0.335nm thick .
Graphene chemistry has significantly reduced heat and resistance.
Put simply, faster top end speed coupled with blistering acceleration.
The result is a battery capable of maintaining greater power output whilst remaining much cooler under load.

Spec.Capacity: 6000mAh

Voltage: 6S1P / 6 Cell / 22.2V

Discharge: 100C Constant / 200C Burst

Weight: 880g (including wire, plug & case)

Dimensions: 155x48x55mm

Balance Plug: JST-XH

Charge Rate: 1-5A Recommended. 5A

Discharge Plug: XT90

Lithium Polymer (LiPo) Battery Warnings 

  1. Never charge a lithium polymer battery with a charger designed for NiCad, NIMH or any other type of battery chemistry. Use ONLY charger designed for LiPo battery. 
  2. Do not leave LiPo battery unattended during charging. 
  3. Do not over charge the battery. 
  4.  Always place the battery on a heat resistant surface alone when charging. 
  5.  Always put the LiPo battery inside a charging protection container while charging. 
  6. Do not allow LiPo cells to overheat at any time. Cells which reach greater than 140 Fahrenheit (60 C) will usually become damaged and will catch fire. 
  7. Do not allow LiPo cells on or near combustible materials including paper, plastic, carpets, vinyl, leather, and wood, inside an R/C model or full size automobile. 
  8.  Do not over discharge LiPo, doing so will damage the battery
  9. Do not expose LiPo cell to water or moisture at any time.  Do not store battery near open flame or heater. 
  10. Do not assemble LiPo cells or pre-assembled packs together with other LiPo cells or packs.  Always store LiPo battery in a secure location away from children. 
  11. Always remove the LiPo battery if model is involved in any kind of crash. Carefully inspect the battery and connectors for even the smallest damage. CAUTION: cells may be hot! 
  12. Do not allow the electrolyte to get into eyes or on skin. Wash affected areas immediately if they come into contact with electrolyte. Do not alter or modify connectors or wires of a LiPo battery pack.
  13.  Always inspect the condition of the battery before charging and operating. 
  14. Do not short circuit the LiPo battery  Do not have contact with a leaky/damaged battery directly. 
  15. Do not charge battery out of recommended temperature range (oC-45C)